花紋鋁板屬于在鋁板的基礎上，經過壓延加工而在表面形成各種花紋的鋁產品，應用較為廣泛，主要用在包裝，建筑，幕墻等方面。那么，花紋鋁板拉絲的質量要如何檢測？下面鋁板生產廠家給您講解。
The patterned aluminum plate is an aluminum product that forms various patterns on the surface of aluminum plate after calendering. It is widely used, mainly in packaging, architecture, curtain wall, etc. Then, how to detect the quality of patterned aluminum wire drawing? Next, the aluminum plate manufacturer will explain to you.
1、標識的檢查：平常我們看到的花紋鋁板都是具有標識的，而且標識上是有產品的標準代號和許可證的。
1. Identification inspection: usually, the patterned aluminum plates we see have identification, and the identification has the standard code and license of the product.
2、氧化膜的厚度：這個是需要使用渦流測厚儀器進行檢測。
2. Thickness of oxide film: eddy current thickness measuring instrument shall be used for this purpose.

3、表面質量的檢查：在花紋鋁板的表面除了要看清潔與否之外，我們需要看到更多的東西，比如我們應該看看鋁板材是否出現了一些裂痕或者出現了一些腐蝕的現象，這些都是需要仔細的觀察的才能發現的。
3. Inspection of surface quality: In addition to checking whether the surface of patterned aluminum plate is clean, we need to see more things. For example, we should check whether there are cracks or corrosion on the aluminum plate, which can only be found by careful observation.
4、封孔質量酸浸法：封孔的形成是在進行的陽極氧化后才形成的，如果這些封孔沒有很好的處理的話，就會導致以后的鋁板材被腐蝕的現象出現。通常我們進行的檢測方法是酸浸法，就是除去表面的灰塵之后，將硝酸滴到表面，進行輕輕的擦拭之后，用水洗掉硝酸，再在表面滴上紫藥水，一分鐘后搽干凈，看看表面是否有明顯的痕跡，如果有的話就說明封孔沒有處理的很好。
4. Sealing quality acid leaching method: the sealing is formed after anodizing. If these sealing holes are not well treated, the aluminum plates will be corroded in the future. Usually, the test method we use is acid immersion method, that is, after removing the dust on the surface, we drop nitric acid onto the surface. After gently wiping, we wash the nitric acid with water, and then drop purple liquid on the surface. After one minute, we wipe it clean to see if there are any obvious marks on the surface. If there are any, it means that the sealing is not well handled.
此外針對花紋鋁板的選用，關于上下起浮聯接方面也是很重要。針對不同的花紋鋁板，可能存在不一樣的固定辦法，所以一定要選擇合適該類型花紋鋁板的固定辦法，這樣能夠協助你防止因板塊受力不均，然后導致面板出現了變形的情況。更多相關事項的了解就來我們網站http://www.igugo.cn咨詢吧！
In addition, for the selection of patterned aluminum plates, it is also very important for the connection of up and down floating. There may be different fixing methods for different patterned aluminum plates, so you must choose a suitable fixing method for this type of patterned aluminum plate, which can help you prevent the deformation of the panel caused by uneven stress on the plate. For more information on related matters, please come to our website http://www.igugo.cn Consult!